Sprout is an open source replacement motherboard for iPods that keeps the original screen and click wheel, but adds Wi-Fi, Bluetooth and streaming apps.
Sprout is an open source replacement motherboard for iPods that keeps the original screen and click wheel, but adds Wi-Fi, Bluetooth and streaming apps.
Hot off the back of price rises it announced in October, the Raspberry Pi Foundation today said the cost of its Raspberry Pi 5 single-board computers is going up again. From November 2026, the Raspberry Pi 5 with 16 GB RAM rises by $80, now priced at $385 from approved resellers. The model launched at $120 back in 2025, rose to $205 in early 2026, and later incremental increases got it to $305. And itβs not the only model whose price tag will be making wallets wince. A $40 price hike hits the Raspberry Pi 5 Compute Module (CM5) with [β¦]
Hot off the back of price rises it announced in October, the Raspberry Pi Foundation today said the cost of its Raspberry Pi 5 single-board computers is going up again. From November 2026, the Raspberry Pi 5 with 16 GB RAM rises by $80, now priced at $385 from approved resellers. The model launched at $120 back in 2025, rose to $205 in early 2026, and later incremental increases got it to $305. And itβs not the only model whose price tag will be making wallets wince. A $40 price hike hits the Raspberry Pi 5 Compute Module (CM5) with [β¦]
Raspberry Pi has announced further price increases for its single-board computers driven, of course, by the ongoing cost of memory components. The cost of a 2GB Raspberry Pi 4 or Raspberry Pi 5 jumps by $12.50 (Β£12) from 1 October, 2026: Model Launch price Old price New price Raspberry Pi 4 (2GB) $45 $55 $67.50 (Β£64.80) Raspberry Pi 5 (2GB) $50 $65 $77.50 (Β£74.40) For context, the Raspberry Pi 4 2GB model launched at $45 in 2019. It was later reduced to $35, before increasing back to $45 in 2021. It then rose by $10 in February to $55. At [β¦]
Raspberry Pi has announced further price increases for its single-board computers driven, of course, by the ongoing cost of memory components. The cost of a 2GB Raspberry Pi 4 or Raspberry Pi 5 jumps by $12.50 (Β£12) from 1 October, 2026: Model Launch price Old price New price Raspberry Pi 4 (2GB) $45 $55 $67.50 (Β£64.80) Raspberry Pi 5 (2GB) $50 $65 $77.50 (Β£74.40) For context, the Raspberry Pi 4 2GB model launched at $45 in 2019. It was later reduced to $35, before increasing back to $45 in 2021. It then rose by $10 in February to $55. At [β¦]
If your Raspberry Pi can no longer connect to Wi-Fi because the SSID or password changed, you can update the Wi-Fi configuration directly from its SD card. This helps when you cannot connect the device to a monitor and keyboard.
That's what I did. I had switched to a different internet provider, and that changed the router, its SSID and the password. I was using a Raspberry Pi Pico W in my Pi Dog. Connecting it to a screen and keyboard would have been a pain.
The easier option was to just take out the SD card and edit the WiFi details directly there. The entire process is composed of the following step:
Insert the SD card with Raspberry Pi OS on it on your (Linux) computer
Go to the mounted rootfs partition and go to /etc/NetworkManager/system-connections/ location
Here, either create or edit .nmconnection file and enter the wifi name (SSID) and password
Let me show that in detail for you.
π§
Older Raspberry Pi OS releases may use wpa_supplicant.conf instead of NetworkManager. In that case, this method may not entirely be applicable. I have tested it on Raspberry Pi 5 running Raspberry Pi OS based on Debian Trixie.
Step 1: Connect the SD card to your computer
Shut down the Raspberry Pi, remove the microSD card, and insert it into your Linux laptop or desktop using an SD card reader.
Raspberry Pi OS usually has two partitions:
bootfs
rootfs
The Wi-Fi configuration is stored inside the rootfs partition.
If you only see bootfs, mounted, you can mount rootfs from the file explorer.
As you can see, for me, the Raspberry Pi root filesystem is available at:
/run/media/abhishek/rootfs
You can also confirm it with:
mount | grep rootfs
/dev/sda2 on /run/media/abhishek/rootfs type ext4 (rw,nosuid,nodev,relatime,errors=remount-ro,uhelper=udisks2
Step 3. Check the existing Wi-Fi configuration
Recent Raspberry Pi OS releases store NetworkManager connection profiles here:
/etc/NetworkManager/system-connections/
π§
Make sure to use your own username and the correct path of rootfs and files by replacing them in the command examples. You can also keep on using $USER as this environment variable automatically uses your username.
Since we are accessing Raspberry Pi OS through its SD card, run:
sudo ls -la /run/media/$USER/rootfs/etc/NetworkManager/system-connections/
If you already see a .nmconnection file, you can edit that file.
No nmconnection file? Create one
If the directory is empty, create a new Wi-Fi profile.
Your work is almost done. You just need to set the correct file permissions. That's because NetworkManager expects connection files to be readable only by root.
sudo ls -l /run/media/$USER/rootfs/etc/NetworkManager/system-connections/
The file should look something like:
-rw------- 1 root root ... home-wifi.nmconnection
π
Before going further, double ensure that you have used the correct WiFi SSID and the password. Any typo and you will have to repeat the process. You won't want that to happen.
Step 5. Flush the changes to the SD card before removing
This is an important step. After making all the changes, run this command:
sync
The sync command makes sure any pending writes cached in memory are actually written to the SD card.
And then you can either unmount from the file explorer or use the umount command for both partitions:
The simplest way would be to log in to your router and see the connected devices.
Otherwise, Angry IP Scanner is a good graphical tool for scanning your network. Command line tool nmap also does the job:
sudo nmap -sn 192.168.0.0/24
Normally, it should show your Raspberry Pi's hostname. You can also try to run scan before turning on Pi and a few minutes after turning it on. This should show the new devices that turn up between the two scans.
This dope Raspberry Pi 5 case has a tower cooler and dual RGB fans to keep the device cool. It also extends your Pi 5 with M.2 SSD slot and 2 standard HDMI ports.
Raspberry Pi has launched a 10-inch version of its Touch Display 2 with a 1200Γ1920 resolution and 10-point captive touchscreen for $80/Β£77. 5-inch and 7-inch variants of the Touch Display 2 have been available for a while, but Raspberry Piβs Gordon Hollingworth says the new version gives makers a larger, higher resolution screen to use in their projects. Like the smaller versions, the 10.1β³ Touch Display 2 uses a portrait orientation by default, where the displays are often used for home automation dashboards, kiosks, digital signage, control panels, etc. It can be used in landscape by changing the orientation in [β¦]
Raspberry Pi has launched a 10-inch version of its Touch Display 2 with a 1200Γ1920 resolution and 10-point captive touchscreen for $80/Β£77. 5-inch and 7-inch variants of the Touch Display 2 have been available for a while, but Raspberry Piβs Gordon Hollingworth says the new version gives makers a larger, higher resolution screen to use in their projects. Like the smaller versions, the 10.1β³ Touch Display 2 uses a portrait orientation by default, where the displays are often used for home automation dashboards, kiosks, digital signage, control panels, etc. It can be used in landscape by changing the orientation in [β¦]