❌

Reading view

There are new articles available, click to refresh the page.

A very lucky husband

I was chatting with a friend in the fediverse today, and I realised that I have been married for 14 years.

Sandra and I started dating 18ish years ago, which is - give or take a few years - roughly half my life so far.

And while that makes sense, chronologically, it absolutely amazes me.

When we started our business, working from home, we talked about what it would be like to work together, and live together, and basically be around each other pretty much all of the time.

I am not a very sociable person (although I can turn that on, for limited periods, when I need to), and honestly that idea was slightly frightening to me. Would it ruin our relationship? Would we struggle for lack of personal space?

I think that my concerns were valid, but it turns out that they were misguided: more than 10 years later, and we’re still together.

Really, it is more than just “still together”. Much more.

I get to spend an awful lot of time, every day, with someone who is not just my best friend, but also the person that I love.

In a way, it is daft: despite being around each other all the time, I occasionally catch a glimpse of Sandra - not doing anything special, or dressed up, just something normal and mundane in the house - and I see the most beautiful, clever, loving woman that I’ve ever met, and I smile.

I wake up each morning, feeling both lucky and grateful.

And boy do I make sure that I tell her this.

Not All Men

Sorry, this is a bit of a grumpy / ranty one.

The UK is going through what yet another spate of news of men - at the moment, rich men, famous men, men in a position of power or authority - accused, and sometimes even convicted, of assaulting, raping, and abusing women.

The reports - and those, of course, are only the ones that we know about, with intimations that there are non-disclosure agreements, perhaps even further injunctions, preventing more publications - are horrifying.

I am fed up of hearing “but it’s not all men”.

It’s too many men, for a start.

It is not isolated: almost (not all, but almost) every single woman with whom I have spoken about this kind of thing has recounted at least one, often more, horrible, scary, unwanted experience at the hands of one or more men. I can’t say, based on my limited data, that it is all women. But I could easily believe it.

And it is pretty much always men.

Plus, there’s a dearth of men talking loudly about doing anything about it. I saw a piece today about a comedian talking about how she looked out for other comedians, and how comedians share notes on their experiences with men comedians, but I haven’t seen anything from men comedians talking about how they are standing up for / looking out for comedians, for instance. Worse, men comedians saying how they couldn’t possibly have known, and had no reason to suspect etc..

One particular bugbear, for me, of the #NotAllMen nonsense, is that yes, it is all men, including me, until someone determines otherwise for themselves.

So, no, it might not be specifically you, but that cannot be safely assumed. Asserting it is not the same as demonstrating it, with actions speaking louder than words.

I was taken by the analogy of handling guns: that you treat every gun as a loaded gun, until you have personally, carefully validated that it is not. And even then, you may still be wrong - I’ve seen negligent discharges of weapons that the handler had just “validated” were clear.

As for the nonsense that men cannot ask women out, or have lunch with a colleague, or talk to a woman, or whatever. What rot (contains adult language).

Automating renewal of Let's Encrypt certificates with Home Assistant OS

I had an alert from my monitoring tool that the Let’s Encrypt TLS certificate for my Home Assistant OS installation had expired.

The answer lay in the documentation for the Let’s Encrypt app:

Certificates are not renewed automatically by the plugin. The app has to be started again to renew certificates. If the app is started again, it checks if the certificates are due for renewal. This is usually the case 30 days before the certificates’ due date. If the certificates are not due for renewal, the app terminates without changes. If the certificates are due for renewal, new certificates will be created.

There are multiple ways how the app can be started to check/renew the certificates. One way to automate the certificate renewal is to configure a Home Assistant automation to restart this app every night via the Supervisor app restart action.

My automation looks like this:

alias: Restart Let's Encrypt each night
description: ''
triggers:
  - trigger: time
    at: '22:00:00'
    weekday:
      - mon
      - tue
      - wed
      - thu
      - fri
      - sat
      - sun
conditions: []
actions:
  - action: hassio.app_restart
    metadata: {}
    data:
      app: core_letsencrypt
mode: single

I can see in the log for the Let’s Encrypt app, and the log for the automation, that it ran as expected so, fingers crossed, no more TLS certificate issues…

Upgrading my Airsoft rifle

I spent a pleasant morning at Red Alert, making a couple of small (but hopefully useful) upgrades to my main Airsoft rifle (MTW).

I changed the routing of the air line for the HPA engine, routing it out the back of the rifle, under the buffer tube, moving it from down the hand grip.

I also replaced the stock grip with a grip containing batteries and switch, so that I can power the HPA engine with that, rather than needing to install a Li-Po battery each time.

These were reasonably straightforward upgrades, and I was keen to do them myself - to get the benefit of the learning experience - but I was also very keen to do it around people who know what they are doing.

I also wanted to borrow an armourer’s wrench, as I do not have one, and I so rarely need one that buying my own seems a bit pointless.

Luck was on my side, as the upgrades went smoothly.

I dropped a small spring at one point, and I did not know from whence it came. It turns out that it was a spring which retains the small pin which keeps the large rear metal pin in place - it is inserted from near the stock at the back of the rifle, through a small hole, which I uncovered when I replaced some parts to re-route the air line.

Fitting the upper and lower receiver back together, with the new, shorter, air line in place was a bit of a pain, but hopefully I am not going to need to open up the weapon too often, having made these changes. Perhaps the next time that I need to change the hop rubber? But not each week as I did before, to insert and remove the battery.

I took the opportunity to make a slight adjustment to my HPA regulator’s output, giving me an increase of about 10 feet per second, while hopefully keeping me sufficiently clear of the upper limit for this weapon that I don’t need to tweak it down again when I use someone else’s chronograph when I next play.

Lastly, I re-zeroed my red dot, as it was slightly out.

I was doing pretty well at the end, hitting with reasonable accuracy out to 70m, so I look forward to giving this a go in a game very soon.

Fixing the unavailability of Tasmota devices after HomeAssistant restarts

Earlier this year, I moved from running HomeAssistant in Python venvs to HomeAssistantOS.

After an initial challenge with proxying, it has been working fine. I still don’t like using HAOS, but I can live with it.

It seems to need updating a lot, and there is no - at least, not that I have found - automated way of doing this.

So I am using an automation based on this template to automate updates.

This works fine, but I have noticed that my Tasmota devices - of which I have quite a lot - are unavailable after HomeAssistant Core restarts.

There are a lot of search results about this, so I am not the only one with this problem.

I looked into a couple of the options (SetOption104 to 0, and SetOption19 to 0), but I already had these set.

Reloading the Tasmota integration did not do anything either.

What seems to have worked, though, is an automation which tells all the Tasmota devices to restart, once HomeAssistant restarts.

Mine looks like this:

alias: Restart Tasmota devices on HA restart
description: ''
triggers:
  - trigger: homeassistant
    event: start
conditions: []
actions:
  - action: mqtt.publish
    metadata: {}
    data:
      evaluate_payload: false
      qos: '1'
      retain: false
      topic: cmnd/tasmotas/restart
      payload: '{{1}}'
mode: single

This seems - a bit more testing needed - to preserve the state of the device, so if it is off when it restarts, it remains off, and vice versa.

I imagine that, because the Tasmota devices are restarting, if HomeAssistant tried to send a command to one or more devices during this restart window, the command would fail. Probably not an issue for me, but perhaps something to bear in mind.

LibreOffice Writer, changing text styles, and accepting formatting changes

Hello, future Neil. Here are the two things that you often want to do with formatting and LibreOffice Writer, but do not always remember how to do them.

Changing all text in one style to another style

You can use the “Find and Replace” function to change all instances of text in one style to another style.

Ctrl + H to open “Find and Replace”.

Under “Other options”, select “Paragraph Styles”.

In “Find”, select the style that you want to replace.

In “Replace”, select the style with which you want to replace it.

Accepting all formatting changes in tracked changes

Often, I want to tidy up tracked changes in a document, to remove formatting changes.

From the menu bar, select Edit / Track changes / Manage …

Select the “Filter” tab, and, under “Actions” select “Formats”.

Go back to the “List” tab, and then “Accept All”.

Fixing my LocalBytes Tasmota smart bulb which had lost its Tasmota template

I have used a LocalBytes smart bulb in our porch light for ages.

It is controlled by Home Assistant, so that it comes on a few minutes before sunset, and goes off later in the evening.

For some reason, it reverted to Tasmota’s default settings - without the LocalBytes bulb functionality - a while ago.

Now that the clocks have changed, and it is darker earlier, fixing it moved up my priority list.

Fortunately, it was pretty straightforward, thanks to the LocalBytes documentation.

The key bit is the Tasmota template for the bulb:

{"NAME":"LocalBytes Bulb","GPIO":[0,0,0,0,416,419,0,0,417,420,418,0,0,0],"FLAG":0,"BASE":18}

With this, and the Tasmota instructions for importing templates, I have a working bulb again.

A review of the BigMe B6, an Android colour eInk tablet

For quite some time, I have been keen to try an Android device with an eInk screen, particularly a colour one, but I had not found one at a price that I was willing to pay.

I saw the BigMe B6 on AliExpress. It was £134.00, and seemed to meet my requirements - including a pocketable 6” screen, and a USB-C port - and I was willing to spend that to give it a try.

It arrived quickly, and came with a nice folding case which holds the device magnetically, and turns the screen on and off when opening and closing it.

Setting it up

I had 88% charge when it arrived, so I was able to get on an use it straight away.

Backing up all the partitions (except userdata)

I used mtkclient to back up all the partitions on the device (except userdata), in case I needed to restore them. At this point, I was planning on rooting the BigMe B6, but ultimately I decided not to do so.

I used python mtk-gui.py for this, using the “Read partitions” function. (I used “Select all partitions”, and also had “Dump GPT” set (which it was by default). I then manually de-selected “userdata”.)

I clicked “Read partition(s)” to start the partition dump.

This took 20 minutes or so, mainly thanks to the 12 GB “super” partition.

Backing up the software

I backed up all the existing apks (in case I needed to reinstall them, in the event of rooting the device and uninstalling software):

adb pull /system/app/. ~/Desktop/bigme/backup/

Disabling lots of software

It comes with a lot of unnecessary (to me) stuff on it. I’d prefer a far more plain, unencumbered, device.

I used this gist as inspiration, and used adb to disable a lot of that software.

I have not rooted the BigMe B6, so the software is just disabled, not removed.

It mounted as a USB device

I have seen some posts saying that it tries to work as a USB host by default.

Perhaps things have changed, but when I plugged it into a laptop (Debian 13, GNOME), it mounted as a USB client device, just as I would expect.

How I use it

Recreational reading and browsing works really well

My goal in buying this was to have a cheap-ish device, for recreational stuff. So, I have installed F-Droid, and used F-Droid to install:

  • Tusky (Mastodon client)
  • Fennec (browser)
  • Tor Browser
  • Readrops (RSS reader)

All run fine.

I also installed Heliboard, as an alternative keyboard. I like the customisability, in particular being able to make it smaller and yet easier for me to use than the native keyboard.

The launcher is a bit childish, in a “looks poorly hand drawn to me” kind of way, but I don’t spend much time looking at it, so I have not bothered to do anything about replacing it.

I’d like to try it with a Bluetooth keyboard at some point, I think, and see what it is like writing in vim or similar.

Great as an eBook reader, but transferring books is a pain

It had some included eBook reading / management software, but I disabled all of it in favour of using KOreader.

KOreader has its own quirks (perhaps a blogpost in itself) but, frankly, it does exactly what I need, and it does it well. In particular, I like being able to set the margins and line spacing that I want, and the auto-turn functionality, which flips the page after a set number of seconds, is very handy.

The main pain point for me is that I have never successfully managed to sync my library of books - in Calibre - to the internal storage. I think that it is the sheer number of items, but whether I use Calibre’s own sync function, or drag-and-drop, or just rsync, the transfer fails. And I have had one heck of a time trying to remove books from the internal storage, again perhaps because of the number of items in the directory.

Frankly, this is annoying, and I wish that I had solved it, but I have not.

Instead, I have worked around it, spending an extra £20 for a micro SD card, and accepting that, to copy books to the card, I need to remove it from the BigMe B6, put the micro SD card into a laptop, and rsync the ePubs from my library to it from there. What a pain.

I could, in time, experiment with something like syncthing on it, but all I really want is to be able to plug in the eReader, via USB-C, and rsync books to it.

But, hey, with a micro SD card and KOreader, I can read my books on it.

The screen works really well for this - it is a joy to read on it.

Browsing the web

Browsing on an eInk screen is an interesting experience, and I have played around with the screen refresh settings to see if I can optimise it a bit.

It is, IMHO, surprisingly snappy and browsing the web is no problem unless the site is poorly designed and full of JavaScript, in which case it is tolerable.

Watching / streaming videos is possible, but not desirable. Fine at a pinch, or if one likes a sort of cyberpunk aesthetic. But I would not buy the BigMe B6 for watching video.

I turn the Wi-Fi off when I am finished, if I am not switching off the device completely.

The screen

The screen on the BigMe B6 is really nice!

The screen refreshes fine, and it is easy to scroll around / use the touch-screen functions.

It works a heck of a lot better than I was expecting for the price, to be honest, and I really enjoy reading / browsing on it.

It is just as pleasant - if not slightly more pleasant - to read on it than it is on my dedicated eReader.

Changing the eInk settings can make a significant difference, with clarity / removal of ghosting coming at the cost of more regular refreshes (which means a flash and a short delay). I want to experiment some more with this, perhaps with per-app settings.

The “colour” part of the colour screen is also nice, if a bit of a novelty for me.

The colours on the screen are a bit washed out / muted, but it is more than sufficient to display a book cover, or to give a decent enough representation of a photo in a blogpost. It is - of course - nowhere near as good as the colours on a non-eInk screen.

Here’s a blogpost by Derick Rethans:

Photo of a blogpost with a colour photo of a sea gull. The image is reasonably sharp, even if the colours are a bit muted

Battery life

Overall, while battery life is not a patch on my Kobo Clara HD, it is absolutely fine.

To make the most of it, I turn the device off (as opposed to just pressing the power button, which darkens the screen, but does not power it off), if I am not going to be using it for a while. The trade off is that it takes about 60 seconds to boot.

With Wi-Fi turned on, it - unsurprisingly - used the battery more quickly than if Wi-Fi is off. So I keep Wi-Fi off too, unless I am using it.

I don’t have any particularly good observations here, other than it being worse than my eReader. I charge it a couple of times a week, or more if I am reading loads or browsing a lot, but obviously YMMV.

And that’s fine. I am rarely far away from a USB-C cable.

System bits

Android’s “About” pane

According to the Android “About” pane:

  • Device name: Smart Office Notepad
  • Model: B6
  • Product Code: Color
  • Processor: Octa-core
  • RAM: 4GB
  • Storage capacity: Available 41.93 GB / Total 64.00 GB
  • Screen resolution: 1072x1448

Remapping the printed buttons at the bottom

The device has five printed buttons at the bottom of the screen.

The first two - something that looks like a graph, and one marked “AI” - stopped working once I had disabled some of the unnecessary software.

While I cannot change the look/text of these buttons, using “Key Mapper” from F-Droid, I was at least able to re-purpose these. I have not dug too much into this app, but it looks pretty useful in itself.

Now, the “graphs” button (which gives a key code of 10018) toggles Wi-Fi (after some scary warning screens about “Expert Mode” in Key Mapper), and the “AI” button (which gives a key code of 10019) launches KOreader. Excellent stuff :)

No registration required

It had a Login screen. I pressed “Skip”. I have not logged in or done any form of registration.

It looks like one can register an account with BigMe, but it is not a requirement. I have not found anything that I cannot do for lack of an account.

It comes with Google Play, and I guess that one would need to sign in with a Google account to use that, but I have not done so and, again, I have not found anything that I cannot do as a consequence (since I do not use Google Play).

Android 14

The BigMe B6 came with Android 14.

I could be wrong, but I should be surprised if it got much in the way of software updates.

It came with version 3.0.0 of “BigMe” (whatever that is), and there was no system update available.

A phone OS, on a tablet

The version of Android that BigMe is using is clearly intended to be on a phone. For instance, in the shutdown menu, it offers an “SOS” function, to call the emergency services.

Not a big deal, and certainly something that I overlook easily for the price, but, well, not great either.

The settings app is limited

I am used to having a lot more settings available to me, in GrapheneOS.

The BigMe B6’s settings app is spartan, but so far the only thing that has bugged me is lack of a dark mode control. I can do it using adb, but that is an unnecessary pain. Instead, I just set dark mode manually in each app.

Encryption, and do I trust it?

Android settings says that the device is encrypted.

But I don’t know what is encrypted.

So far, I have not put anything sensitive on it, and I do not plan to do so - I don’t know why, perhaps coming from using GrapheneOS instead of stock Android - but while I am happy to use it for recreational stuff, I can’t quite bring myself to connect it to my email account, for instance.

Blurring part of a video using ffmpeg

Hello, future Neil!

You are probably trying to remember how you blurred part of a video.

You blurred the bottom left portion of a circus video, using ffmpeg.

You used:

ffmpeg -i vid.mp4 -filter_complex "[0:v]crop=440:80:0:370,boxblur=2[mask];[0:v][mask]overlay=0:370[v]" -map "[v]" -map 0:a -c:a copy vid-with-blur.mp4

where:

  • crop=440:80: this is the size of the boxblur, 440px wide, 80px high
  • :0:370: this is the position of the boxblur, starting from left top. i.e. 0 pixels from the left, 370 pixels from the top
  • boxblur=2: this is how dense the blurring is. 2 is quite weak; 10 is strong
  • overlay=0:370: this needs to match the position of the boxblur

Environment and climate risks, technology law, and legal advice in England and Wales

I need to say up front that I do not have all the answers here.

Rather, this is a blogpost on a topic which I have been mulling for a while, and which I thought was interesting enough to document, even at this nascent stage.

The nub of my pondering is this:

if a client comes to me, a solicitor in England and Wales, to what extent must I explain environmental and climate risks?

The Law Society’s guidance on the impact of climate change on solicitors

The Law Society has published a guide to the impact of climate change on solicitors.

This says that:

climate change may have an impact on a solicitor’s duty to warn clients of the legal risks in certain contexts.

It goes on to say that that:

In the context of climate change, this means that a solicitor who becomes aware in the course of acting on a retainer that there are climate legal risks that might impact the client’s interests in scope of the retainer should disclose such risks to your client in a clear and understandable way.

“in scope of the retainer” language seems key, but I wonder how far the Law Society considers it to stretch.

If, for example, a solicitor is asked to advise on a specific issue, it seems reasonable to me to conclude that the solicitor’s duties are limited to that specific issue. That is the scope of their retainer.

If there is a “climate legal risk” within that scope, then the solicitor is expected to be able to identify it and explain it, and that seems fair enough.

From a professional competency perspective, it says:

You may need to be able to discuss climate-related legal issues competently with your client and potentially encourage certain clients to engage with climate issues where they are relevant or material to the particular client or matter.

I don’t know whether it is intentional or accidental that it says that a solicitor may need to be able to discuss “climate-related legal issues”, but that they may need to encourage clients to “engage with climate issues”.

The latter phrase seems to me to be much broader than “climate-related legal risks”, but it might be an unintentional discrepancy.

Or is it?

The Law Society has also published a Climate change risk examples and checklist for legal practice, which seems to take a broader approach.

For example, it says that solicitors should:

Consider the impact of physical risks on clients’ businesses (such as when advising on property transactions and asset purchases).

Perhaps this is par for the course in property transactions and asset purchases. I genuinely do not know.

If a client asks a solicitor to review a contract for the procurement of connectivity, I would be a bit surprised that it might be the role of the solicitor to comment on the possibility of the fibre optic being hit by a hungry backhoe.

Similarly, it asks solicitors to consider:

How will the client mitigate their greenhouse gas (GHG) emissions and adapt to be climate resilient?

I might be being dense, and if, so I have some more work to do, but is this really legal advice?

Lastly (in terms of examples), the guidance says that solicitors should:

Be aware of how changes in client demand or stakeholder sentiment could affect asset values and operating costs. For example … the sale value of a company with a high carbon footprint or large net negative impact on nature could change rapidly

I am careful not advise on whether something is a good business decision for a client or not, or whether something is worth the price that the client is being asked to pay, as I am simply not in a position to do so.

But, again, perhaps if I did mergers and acquisitions work, for instance, this would already be second nature?

Applying this to my practice

I’d like to think that I am already in tune with environmental issues in a general sense.

We certainly try hard as a small business.

So, my scepticism that some of this guidance seems to suggest duties which stretch beyond giving legal advice aside, I obviously want to do a great job for my clients, and also help protect the environment.

I do not do conveyancing (buying or selling real property), nor do I work on deals to build things, such as data centres. I have not been asked to advise on AI training or the rollouts of the physical infrastructure of new communications networks. I do not get involved in mergers and acquisitions, or valuing assets.

Most of my work tends to be quite specialised and specific. I do not, for example, take on “fractional general counsel” work, where I might reasonably be expected to have a broad generalist knowledge.

So, in terms of the stated scope of the guidance, I’m probably mostly if not entirely outside it.

I guess that the main outcome of this reading is that I am - I hope - more attuned to the possibility of needing to flag climate or environmental (legal?) issues, even if I do not expect this to be a regular part of my day’s work based on what I do at the moment.

'Serious Saturday' at Red Alert Airsoft, Newbury

I started playing Airsoft a year ago, after a long hiatus.

Since then, I have played quite a lot, pretty much every two weeks (and then, during the summer, an additional Friday evening targets session, every other week).

I am still not particularly good at it, and I could certainly do with getting fitter, but I have got to a point where I am content with the equipment that I have, and I can go out and play with a sense of purpose.

I have played all of my games at Red Alert Airsoft, in Newbury. This is for three reasons:

  • the people there are just lovely. Such a friendly, welcoming, down to earth group.

  • it is about 10 minutes away, which is very convenient

  • I enjoy it! I like the mix of games, and while some days have, perhaps inevitably, been better than others, none has been less than excellent.

I am sure that there are other good Airsoft sites, but I’ve just got no incentive to go anywhere else.

The days that I enjoy the most are the “Serious Saturday” days. This is an all-morning game, with a break for lunch, and then either an all-afternoon game, or a slightly slower pace of smaller/shorter games during the afternoon.

There is nothing particularly “serious” about it - everyone is there to have fun, as usual, and no-one takes the games too seriously. There’s always a chance for a laugh and a chat with the other team, normally after you’ve just been hit after spending ages getting to the other side of the site.

In my experience - perhaps because of the scary-sounding “serious” name, or the fact that it is on a Saturday when Red Alert mostly runs Sunday games - Serious Saturday has fewer participants, and most of the ones I have played have had somewhere between 10 and 25.

Given the size of the site, that makes for two (or three) small teams, and the possibility of splitting down into two-person squads, and that - for me - really works.

Skirmish days, when there are 100+ people on the site, are fine, but I do prefer the quieter, slightly more strategic, days.

The games are more objective-focussed, and work best when everyone on a team works together. Sure, there’s scope for sneaky individual game play - I spent quite a lot of last Saturday hiding in some ferns, on overwatch on a couple of key points on the site, happily taking down people as they appeared nearby - but it needs to fit in with the overall team strategy to make sense.

Red Alert has acquired some rather fun Arduino-powered “bombs”, which can be used for various game modes.

Last Serious Saturday, we were playing a “disarm the bomb” game: someone had planted a bomb at our base, and we had to comb the site (30+ acres…) to find the digits making up the code. We had to get them back to the bomb, and disarm it, in the 30 minute time period. The other team had the same objective, and the team which disarmed their bomb first won - not that, honestly, it really matters (to me, anyway) who wins. I’m there to have fun, and get a bit of exercise.

The “bombs” are really rather impressive, and I think that they could actually be used to trigger a pyrotechnic device at the end of the countdown… and that would be fun.

I also spent a bit of time testing the Topdon TS004 thermal monocular for Airsoft - I will probably try that again when the ferns have died down, and sight lines have opened up a bit.

There’s one more “Serious Saturday” this year, and I am looking forward to it.

AI as the new search engines?

I have never done much in the way of advertising for decoded.legal.

When someone new gets in touch to ask about legal work, if it something which we might be well placed to support, I typically offer an initial chat.

As part of that, I ask how they heard about us.

It is mostly “[x] recommended you to me”, or else “I follow you in the fediverse / I read your blog”. This has been pretty consistent, and word of mouth recommendations, or repeat business from happy clients, accounts for the vast majority of our work.

Occasionally, someone says “Your site came up in a search engine”.

Recently, there has been an increase in people saying “AI recommended you”.

It seems that they were using their genAI tool of choice, and asking that for recommendations for tech solicitors, although I have not asked specifically what prompts they used (and I am not sure what I would do with that information anyway).

I have done nothing to the decoded.legal website or blog in terms of “search engine optimisation”. The sites are mostly text, with some basic formatting applied. They load fast over pretty much any connection, because they are tiny.

I don’t have a clever plan for cross-linking posts, or a particular structure to what I write, or anything like that. Perhaps I should. But I do not. Most of the time, for blogposts, I don’t even include a “and if you need help with this kind of issue, please contact us” ending because, well, that just seems unnecessary.

But anyway, apparently, the sites have good “agentic / AI search optimisation”.

I don’t know enough about the topic, but I am surprised that genAI can “recommend” anything. I am surprised that anyone would ask a tool like that for a “recommendation”, which implies some kind of analysis and consideration.

For me, this is just search engine territory, and so perhaps some people are using genAI in the same way that they might have used DuckDuckGo, or Startpage, or Google.

But people are doing it, and decoded.legal’s name and details are coming up.

Mutual aid posts and the fediverse

Over the last couple of years, I’ve noticed more and more “mutual aid” posts. These are posts in which someone is asking for money (usually) or some other kind of support, other than on a commercial basis.)

Mutual aid posts are nothing new - I certainly remember them from Twitter - but I don’t recall seeing the same volume of them. Just counting those in my feed right now (mostly boosts by people I follow of other people’s posts) there are 16.

It could be that I am just seeing more of them. The number is the same, but I am exposed to more of the people who are asking.

It could also be that there simply are more of them. That more people are finding things difficult, or have reached their threshold for needing to ask for help. And, given everything (waves hands) going on in the world at the moment, that feels entirely plausible. More people are struggling.

I am also seeing a difference in approach.

I am used to seeing public #mutualaid posts, phrased in a variety of different styles. Some, recently, seem more aggressive? assertive? guilt-tripping? than I recall. That might be frustration or sheer need talking. I don’t see these too often.

The more substantial change is that over the last year or two, there seems to be an increase in the number of people - people with whom I don’t recall a previous interaction, and I’m not following them - replying to my posts, or else starting a conversation in my DMs. These are nearly all asking for money.

I am not getting loads of these directed mutual aid requests - I know that someone else is getting far, far more - but perhaps a three or four a month.

I know (because they have told me so) that some people regard all mutual aid posts as actual or potential scams, and so filter them out, or simply ignore them.

Personally, I tend to support people with whom I have some kind connection. This feels like being part of a community: trying to help others who need it.

I am willing to accept that I may fall for a scam from time to time, but I’d rather risk being scammed for a few pounds every so often, than not doing anything to support people who need it for fear of a scam.

That said, I do not tend to engage with mutual aid requests from people without some kind of personal link, especially in my replies or PMs.

I don’t have a pithy conclusion; this was just something on my mind.

Testing the Topdon TS004 thermal monocular for Airsoft

I was very lucky that @edent kindly lent me one of his thermal scopes - according to his review, the Topdon TS004 Thermal Monocular - to try out for Airsoft.

I took it today, to Red Alert’s “Serious Saturday” game. This was an absolutely cracking day, which I should probably write about some point.

I only used the thermal scope in the morning, for a little bit, for a few reasons:

  • I did not try to mount it to my MTW (rifle); I just leashed it to myself, stuck it in a pouch, and used it standalone. And while that worked, it was a bit cumbersome.

  • I was a bit worried about getting the glass / lens shot out. It does not work if there is a normal plastic scope / red dot shield in front of it and, while the lens is recessed and relatively small, it is still bigger than a BB.

  • It was, I felt, a bit too good.

    • The Red Alert site is - at this time of year - covered in ferns, which provide excellent cover for sneaky play. Or they would provide cover, if you couldn’t see hot bodies moving around / lying still in them through a thermal scope.

    • If someone was deep in the ferns, they were still very hard to see, but if someone was relatively close, even if invisible to the naked eye, they had a pretty obvious heat signature.

    • I was the only one today with a thermal scope, and it just didn’t seen fair play to continue to use it.

I am sure that, particularly as they come down in price, thermal scopes will become more common in Airsoft. As, I expect, will stuff to help make you less obvious to them.

Sadly, I can’t make the night game which Red Alert is running for Hallowe’en, as I suspect that it would be amazing for that…

I will look forward to trying it again, when the ferns have died down on the site, to see how it well it works then.

But, for now anyway, I don’t plan on using it for Airsoft on a regular basis. If I did want to use a thermal scope, I’d probably look for one which was capable of being mounted on the rifle itself.

Replacing our SIP doorbell with a plain, old-fashioned, doorbell

Just over six years ago, I installed a shiny Fanvil i10 SIP doorbell.

It was little more than a SIP phone in a doorbell box (as the configuration options made clear), but I wanted something which would ring my phone and Sandra’s phone when someone rang it, wherever we were, and I wanted it to go as SIP/RTP, rather than using a proprietary app.

So I installed it, popped it on its own VLAN (because I had to run an ethernet cable to the outside of the front door), configured it to talk to our PBX, and went with it. I didn’t bother with the video side of things.

And, for those six years, it has been fine, ringing our phones whenever the doorbell was pressed.

Recently, calls from the doorbell have been intermittent in their success in calling Sandra’s phone, whether terminating via SIP client, or routing a call to Sandra’s cellular network.

And, sure, I could probably spend the time debugging it, but I was trying to solve a problem which didn’t really need solving: we just need a button for someone to press, and for it to result in a noise in the house, and in my office.

We have a parcel box, which is very obvious and next to the door. Delivery drivers are great at dropping a parcel in there, and leaving without ringing the doorbell, which is absolutely fine. There’s usually an emailed delivery notification and, if we are that desperate, we can always open the box and check (although I did consider fitting a sensor the parcel box door, to trigger Home Assistant, but in the end I did not…).

We are not - currently, anyway - in a position in which we need to know exactly who is at the day (or, rather, who they claim to be) before we answer the door.

So perhaps I didn’t need a “smart” doorbell after all…

A £18 Tecknet wireless doorbell has solved this just fine, and has meant that I can get rid of the ethernet cabling across the front of the house. It has no problem transmitting through the house, across the garden, and to the alarm box in my office and, if I want, I can change the alert mode from noise and light to just light.

It claims to be IP65-rated, and in any case, it is under a porch - the Fanvil device was just fine there.

How does one genuinely identify one's own, non-technical, learning and development needs?

As a solicitor, each year, I need to make a statement of solicitor competence.

Aside from the regulatory requirement, I want to do a great job for my clients: it is a source of my own personal, professional pride.

Similarly, most of my work comes from word of mouth referrals so, simply from a grubby money-making point of view, doing a good job just makes sense.

The requirement, at a high level, is pretty obvious:

the ability to perform the roles and tasks required by one’s job to the expected standard

The Solicitors Regulation Authority helpfully breaks this down into a number of different areas:

  • A Ethics, professionalism and judgment
  • B Technical legal practice
  • C Working with other people
  • D Managing themselves and their own work

Technical competence

Crucially, based on the SRA’s list, technical competence - the “knowing and applying the law” bit - is just one facet of overall competence.

In terms of learning outcomes / knowing what continuing education I need, this is pretty straightforward: I know that I need to keep on top of my stuff. For me, this means both law and technology, since much of what I do draws heavily on both aspects.

In practice, I do this through keeping track of numerous different sources of information, and most of my reflections end up as posts on my work blog.

Sure, there is an awful lot of change in both technology and law, and keeping on top of all the various legal issues can be challenging, but at least I can work out what I need to do reasonably easily.

Other aspects of competence

I find it harder to assess my learning needs in other areas.

Not in a box-ticking sort of a way - actual, genuine, “this would be useful”, development. Stuff that it is worth spending my time on.

I have no colleagues, and while I’ve asked clients for feedback, specifically what I can do better, or things they’d like me to do differently, or things that they have valued in other professional advisors, I have turned up nothing. I will keep asking every so often, but I cannot rely on this as a source of learning needs.

I do my best to assess my own performance, but I struggle.

I keep a document of “practice reflections”, in which I note down issues which cross my mind. Looking back on it for this year, themes include ethics (below), IT and cybersecurity, and, perhaps inevitably, AI.

I mentor people, but I have not been mentored. Perhaps that is something to explore.

Nevertheless, I do what I can - this year, I had a particular focus on ethics, in the light of the Post Office scandal - but I’d like to be better.

I could be led by what is on offer, in terms of seeing what CPD providers are offering, and what other resources are available, and seeing if I fancy any of them. But that feels like the wrong way round to me, since it is not centred on my own learning needs - but it could still be a good source of inspiration.

What others do

So I asked other professionals in the fediverse what they did for their own continuing professional development. (Importantly, I did not ask what they think that I should do, but rather what they themselves did.)

I got a range of answers (including many focussed on technical competence), which I have paraphrased / collated here:

  • a company gives a week off each year for CPD, but the training must be nothing to do with their everyday work.

  • I keep a journal, including things that I find myself hesitating to do, or something that I feel that I did poorly. A variation of this was a “leadership lessons” log, with things that the author saw others do well/poorly, and what they themselves did well/poorly.

  • annually, I prepare a document that contains low points, high points and what I learned from the previous year, and new things I want to try or do / things I want to continue doing / things I want to stop doing for the next year.

  • breadth first and depth first investigations.

  • focussed time, periodically, thinking about my career and role.

  • pay attention to the long term changes.

  • paying for a business coach.

  • looking at people I admire and what they can do, that I wish I could do.

  • talking to people in relevant areas, asking them about challenges they face and skills they have, and comparing it to what I can do or struggle with, and asking what they are up to

  • formal reflections following a template.

  • browse the CPD section of their professional institute, for inspiration.

Next year

I will see what I can take on board here, for the coming year.

And, if you are a client, and you think of something that I can do differently, or better, please do let me know!

On Free software project boards and governance

As always, these are just my opinions.

A board needs a clear, accepted remit

If the remit of the board is not clear to all concerned - the broader community, not just the members of the board - and if that remit is not accepted, argument and politics around what the board should be doing are inevitable.

This wastes everyone’s time, on meta debates and side issues, and leads to conflict and division.

Does the board set the strategy? Define the policy? Hold an executive to account? Mediate or arbitrate disputes? Act as a point of escalation? Fundraise? And so on.

That remit may change over time, and I see no problem in that, as long as that change is in itself both clear and accepted.

A board needs clear, measurable, documented priorities

Similar to the point above, without a clear focus, and a set of documented and measurable objectives / priorities, the board is but an iceberg, bobbing around in the ocean, haphazardly knocking against interesting things.

Without priorities, the board may be full of people who, individually, are all doing, or are capable of doing, great things in support of some broader mission, but without the cohesion needed for a board.

What are the board’s success factors? Failure criteria?

A board meeting needs planning, preparation, and focus

To be productive and worthwhile, board meetings need to have an agenda, and all relevant pre-reading, circulated sufficiently in advance for board members (volunteers, who have other commitments) to read, contemplate, and prepare.

The goal of each agenda item must be clear. Is a decision required? Is this an update (which, for some reason, could not be delivered asynchronously)? Is a discussion required, and if so, to what end? Sufficient time must be allowed accordingly.

A board of volunteers needs to cope, even thrive, with inconsistent participation

In the context of a group of volunteers, consistent participation may be unrealistic. People have other priorities, and may not be able to volunteer every month.

A board which requires 100% of board members to be present to form a quorum for a meeting is not conducive to effective decision making if participation is inconsistent. It means that taking decisions during a meeting is rarely possible.

Similarly, if an asynchronous decision making process requires all board members to vote one way or another, or to abstain, before a decision can be reached, then that process is neutered by a voting member’s non-response.

A board needs to be set up with inconsistent participation in mind, if that is the operating reality of the board.

A board needs transparency, and equal access to relevant information

It is impossible for a board to have informed conversations, and make good decisions - decisions which are truly in the interests of the community that the board serves - unless everyone on the board has access to all relevant information.

Information asymmetry leads, at best, to poor and inconsistent decision making and, at worst, to factionalism and mistrust.

An increased sense of perspective

Over the last couple of years, I’ve found myself increasingly aware of my sense of perspective. Or aware of an increasing sense of perspective.

Of the notion that we have a limited time until we die, and that some of the things - many of the things - which might previously have mattered to me or seemed significant are, in fact, inconsequential, and are not worth getting bothered, let alone worked up, about.

That some things are just not worth the time or effort.

Not to the point of not caring, but rather about being more conscious of the things that I actually care about.

I have long been a fan of “don’t worry about things that I cannot change”, and also the idea of “don’t worry about the small stuff”, and that pretty much everything is “small stuff”.

Conversely, that some things which may seem minor, or inconsequential, may actually have a significant impact on me, or someone else, and so are worthy of focus, of care. Not everything is “small stuff”.

It doesn’t stop me having a flash of annoyance at things, or a sudden urge to Make Something Happen, but it does mean that I am faster, or more willing, to take a step back and think “does this really matter to me? Do I really want to be spending time on this?”.

I don’t know if this is a “getting older” thing, or a “getting wiser” thing, or something else. But it is a noticeable thing.

It’s… curious.

Initial thoughts on the EU KIDS Act

The European Commission has proposed the EU KIDS Act.

It is yet another set of Internet/web regulation proposals to examine, for jurisdictional overreach, lack of common sense in terms of material scope, and so on.

It is only a proposal currently

It is only a legislative proposal at the moment, so it may not become law, and it may not become law in this form.

Based on a quick skim, this is indeed another fine mess, full of unrealistic expectations.

It has an incredibly broad scope

The proposal covers a lot of services:

  • online social networking services;
  • video-sharing platform services;
  • software application stores
  • online games;
  • operating systems;
  • AI companions;
  • general conversational chatbots.

I have read this from the perspective of online social networking services, thinking predominantly about Mastodon and other fediverse services.

At least code forges are out of scope (“open-source software-developing and-sharing platforms”).

And Wikipedia seems to have its own bespoke exemption (“not-for-profit online encyclopaedias”).

Small, low risk services are in scope. The covering material specifically notes:

small and micro enterprises are not exempted from this Regulation, since they may equally provide harms to minors. It would undermine the objective of this proposal to exclude them from scope

Wow. I wonder if the drafters will realise just how harmful this is.

In terms of territorial scope, it is broader than the EU GDPR, and indeed the UK’s Online Safety Act, purporting to apply

to providers of services irrespective of where they have their place of establishment where they offer those services to recipients of the service that have their place of establishment or are located in the Union

I wonder if anyone working on this stopped to think about the boundaries of their laws, and whether they really think that they can impose obligations on people in other countries, merely because that person is running a service which happens to be available to people in the EU?

Do I, as someone who runs my own fedi server, where people in the EU can read my toots and respond to them from their own instance, fall into scope? I do not know.

The proposal would appear to demand age verification for the fediverse

Providers of online social networking services … shall not allow a natural person below the age of 15 years to create an account with that service or to access that service by means of an account, created for, or attributed to, that person, where the service poses a risk to the privacy, safety or security of a minor below that age. (Article 6(1))

The tests for “poses a risk” set an incredibly low threshold, and include:

enables recipients who access the service through an account to transmit content in real-time to an indeterminate number of other recipients of the service, including through live streaming of audio-visual content

and

enables recipients who access the service through an account to contact, communicate and otherwise interact with other recipients of the service not part of the recipient’s pre-existing connections or subscriptions

So a “papers, please” web would become the norm, according to this.

Some of the obligations are just unrealistic

For example:

When creating an account for a minor pursuant to paragraph 2 of this Article, the provider of online social networking services … shall take measures to establish whether the person creating the account is the holder of parental responsibility over that minor in accordance with Article 26 and verify that the recipient of the service has reached the age of 13 years in accordance with Article 28(1). (Article 6(3))

Article 26 sets out how the European Commission envisages this working, but, wow, I just don’t see it.

A watershed for the web?

Harking back to (what should be the exceptionalism of) broadcast regulation, there’s another banger:

Providers of online social networking services… shall put in place effective measures to ensure:

  1. time-limited access for minors on their service;

  2. interruption of usage by minors on their service.

Such measures shall be designed in a way that protects school time and core sleep hours of minors.

(Article 9)

Sorry, I have to turn off my fedi server now, because a child in a different timezone might be heading off to bed and my toots might be distracting…

Unrealistic requirements

Some of the proposals seem to relate to core browser functionality:

Providers of online social networking services … shall put in place measures to ensure that settings are set by default to a high level of privacy, security and safety of minors. To ensure compliance with this paragraph, such providers shall, by default, turn off at least the following settings:

…

  1. access to microphone and camera

and

other recipients of the service shall not be able to download or take screenshots of contact, location or account information of minors or of any content uploaded or shared by minors on the service;

I have no idea how the drafters of this expect the provider of a social media service available via a web browser to restrict screenshots of everything posted by a user. It is not within their gift.

The only way to make this work would be either to force all access to be via an app (which would be daft), or preclude child access (which has age verification challenges).

Child use restrictions

Some of the use restrictions would seem very challenging:

Providers of online social networking services … shall put measures in place that ensure a high level of privacy, safety and security of minors as regards contacts between minors and other recipients of the service. Those measures shall at least ensure that:

other recipients of the service are not able to initiate direct contact with the minor, if the minor has not pre-approved such contact

So a 17 year old here posts something interest. No-one is able to interact with their post, unless the 17 year hold has “pre-approved” it.

Oh, don’t worry, you won’t be able to see their post anyway:

by default, other recipients of the service not previously accepted by the minor shall not be able to access account information of the minor or content uploaded or shared by the minor on the service

❌