❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

22 Things to Do After Installing Ubuntu 26.10 Stonking Stingray

By: Sreenath
27 October 2026 at 05:52

Ubuntu works reasonably well out of the box, but a fresh installation still leaves plenty of room for improvement. A few tweaks, some essential software, and a handful of lesser-known settings can help you get a more comfortable, productive, and personalized desktop experience from day one.

In this guide, let's look at some of the first things worth doing after installing Ubuntu 26.10.

Perform a System Update

Before installing new applications or customizing the desktop, it is a good idea to check for any available system updates. Ubuntu installation images are not updated daily, so there may already be security patches, bug fixes, and package updates waiting to be installed.

The easiest way is to launch Software Updater from the Activities Overview and let it handle the process.

Open Software Updater from Ubuntu Activities Overview
Open Software Updater

If you prefer the terminal, you can use the apt command.

sudo apt update && sudo apt upgrade -y

This command refreshes the package repository information and installs the latest available updates. Taking care of updates first helps ensure a stable and secure foundation before moving on to other post-installation tasks.

Install Media Codecs

Due to licensing and copyright restrictions in certain countries, Ubuntu does not include support for some popular media formats such as MP3, MPEG-4, and AVI out of the box.

Fortunately, installing support for these formats is straightforward. The ubuntu-restricted-extras package bundles media codecs, Microsoft TrueType fonts, and a few additional components that improve compatibility with common audio, video, and office documents.

sudo apt install ubuntu-restricted-extras
💡
If you are using an Ubuntu flavor such as Kubuntu, install the corresponding package instead. For example, Kubuntu users should install kubuntu-restricted-extras.

If you see the EULA or the license screen, remember to use the tab key to select between the options and then hit enter to confirm your choice.

Accept the EULA for Microsoft Software while installing the Ubuntu Restricted Extras package.
Accept Microsoft EULA

Try the AI Voice Input

Typing isn't always the fastest way to get text into a computer. Whether you're taking notes, drafting an email, or quickly capturing an idea, speaking can sometimes feel more natural. Ubuntu 26.10 introduces Myna, an optional speech-to-text feature that brings local voice dictation directly to the desktop.

Myna AI Voice Input

What makes Myna particularly interesting is its privacy-focused approach. Speech recognition runs entirely on your machine, and once the required model is downloaded, no internet connection is needed for transcription. Simply place the cursor in a text field, press the configured shortcut, and start speaking. Do keep in mind that Myna is currently offered as a technology preview, so you should expect some rough edges while the feature continues to mature.

Change Wallpaper and Accent Colors

A different wallpaper and accent color can completely change the look of the desktop without installing any additional software.

To get started, right-click on an empty area of the desktop and select Change Background. From there, you can choose one of the included wallpapers or use the Add Picture button to select an image from your collection.

Change Wallpaper in Ubuntu

💡
It's possible to set a wallpaper directly from the file manager by right-clicking an image and selecting the wallpaper option. However, this is not always the best approach, as the image may later be moved or deleted from its original location, resulting in a missing background.

While you're there, consider exploring the available accent colors as well. Choosing an accent color that complements the wallpaper can give the desktop a more cohesive and polished appearance. 🎨

Enable Flatpak support

Ubuntu promotes Snap as its primary universal packaging format, and you'll find plenty of applications available through it. However, not every developer distributes their software as a Snap package. In the Linux desktop world, you'll frequently come across applications that are available only through Flatpak.

For that reason, it makes sense to enable Flatpak support early on. Start by installing the required package:

sudo apt install flatpak

Once installed, add the Flathub repository, which serves as the primary source for most Flatpak applications:

flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo

After adding Flathub, restart the system to ensure everything is integrated properly. You'll then be able to install and manage Flatpak applications from the command line.

We have a dedicated article explaining Flatpak support in Ubuntu. Give it a read, if you want more Flatpak setup requirements.

Familiarize Installing New Applications

At some point, you'll want to go beyond the default applications that come with Ubuntu. The good news is that Ubuntu has one of the largest software ecosystems in the Linux world, making it easy to find and install both open-source and proprietary software.

Applications can be installed in several ways. Packages available in Ubuntu's official repositories can be installed directly from the terminal:

sudo apt install <package-name>

For those who prefer a graphical approach, open the App Center, search for the application you need, and click Install. Ubuntu's App Center supports both DEB and Snap packages, though it generally prioritizes Snap applications when both formats are available.

Install application via Ubuntu App Center. This screenshot shows the Brave Browser Snap applicaton installation page in the App Center.
Install Application via App Center

Many software vendors also provide Ubuntu packages directly on their websites as .deb files. After downloading one, right-click the file and select Open With → App Center. From there, simply click Install to add the application to your system.

On File manager, right-click on a deb file and then select Open With App Center option.
Open Deb file with App Center

Install Extension Manager

One of GNOME's biggest strengths is its extension ecosystem. Many of the desktop tweaks that Ubuntu users enjoy, including custom docks, app indicators, and advanced tiling features, are powered by GNOME extensions behind the scenes.

While extensions can be installed manually, managing them quickly becomes inconvenient once you start experimenting with a few. The Extension Manager application provides a much cleaner way to browse, install, update, enable, and disable extensions from a single place.

sudo apt install gnome-shell-extension-manager

Add Your Favorite Apps to the Dock

The Dock in Ubuntu provides quick access to running applications and can also serve as a launcher for the programs you use every day.

Adding applications to the dock is simple. Open the application grid using the Show Apps button or press the Super key, then right-click the desired application and select Pin to Dock. Once added, applications can be rearranged by dragging and dropping them to your preferred position.

0:00
/0:14

Pin application to Dock in Ubuntu

The dock itself is also highly customizable. You can change its position, adjust icon sizes, enable auto-hide, and tweak other behavior from the system settings to better suit your workflow.

Customize the Dock

Ubuntu provides you a Dock that host the pinned and opened application on the left edge of your screen. Since it is based on a customized version of GNOME's Dash to Dock extension, there is plenty of room for customization.

For basic adjustments, head to Settings → Ubuntu Desktop → Dock. Here, you can change the dock's position, enable auto-hide, adjust icon sizes, and control how the dock behaves on your desktop.

Ubuntu Dock Settings in the Default System Settings Application
Dock Settings

If you want more advanced options, open Extension Manager, select Ubuntu Dock, and access its settings. This exposes additional tweaks that are not available in the regular system settings, giving you greater control over the dock's appearance and behavior.

Ubuntu Dock extensive settings available via GNOME Extension settings.
Extensive Ubuntu Dock Settings

Click to Minimize

Open Extension Manager, click the settings button next to Ubuntu Dock, and switch to the Behavior tab. Here, locate the Click Action option and change it to Minimize. Once enabled, clicking the icon of an open application will minimize its window.

Set the dock click action to minimize using the extension settings.
Click to Minimize Settings

At this point, when you click on the icon of an opened app in the Dock, it will be minimized to the taskbar.

Or, you can set what I do on my system. Set the Click action to Focus, minimize or show previews.

This setting combines the best of both worlds. If an application has a single window open, clicking its dock icon minimizes it. If multiple windows are open, Ubuntu displays window previews instead, making it easier to switch between them.

Install Extensions

Extensions can add new features, improve existing workflows, or completely change how the desktop looks and behaves.

With Extension Manager installed, discovering new extensions becomes straightforward. Open the application, switch to the Browse tab, search for an extension, and click Install.

We have compiled a dedicated lists of productivity-focused and appearance-focused GNOME extensions, so that you get a good start.

✋
It's usually better to install a few extensions that genuinely improve your workflow and ignore the rest.

Get Familiar with Tiling

Recent Ubuntu releases have significantly improved the tiling experience. Simply drag a window by its title bar to the top of the screen to reveal available tiling zones. Dropping the window into one of these zones automatically snaps it into place.

What makes the experience particularly useful is the tiling assistant. After placing a window, Ubuntu can suggest other open applications to fill the remaining screen space, making it easy to create an organized workspace without manually arranging every window.

Ubuntu Tiling

If you prefer keyboard shortcuts, the traditional tiling keybindings are also available. And because Ubuntu's tiling functionality is powered by the Ubuntu Tiling Assistant extension, many aspects of its behavior can be customized through Extension Manager to better match your workflow.

Take Care of Your Wellbeing

Many of us spend hours in front of a computer without realizing how much time has passed. Whether it's work, studying, gaming, or binge-watching, it's easy to skip breaks and stay glued to the screen longer than intended.

The Wellbeing feature is designed to help with that. Similar in concept to digital wellbeing tools on mobile devices, it allows you to track screen usage and configure reminders that encourage healthier computer habits.

Wellbeing Settings in System Settings
Wellbeing Settings

To get started, open Settings and navigate to the Wellbeing section. From here, you can set daily screen time limits, enable eyesight reminders, configure movement breaks, and even choose whether the display switches to grayscale once a screen time limit has been reached.

Use Your Monitor's HDR Capabilities

If you own a monitor with HDR functionality, then you can take advantage of the HDR support that works with displays of the BT.2100 standard. With this, you get perks like improved brightness, deeper contrast, and a wider color gamut for more vibrant visuals.

To enable this, you will first need to connect a compatible monitor. Then, go to Settings -> Displays page. If everything went well, then you will be shown the HDR and HDR Brightness options.

HDR Settings in System Settings
HDR Settings

Show Battery Stats in Panel

If you are a laptop user who is always on the go and cannot risk your device's battery dying out, then enabling the on-screen display for battery percentage is a must-have for quick battery charge level checks.

To enable this, go to Settings -> Power, then go to the General page and enable the Show Battery Percentage option.

That is not the only way you can spice up the top panel. There are some nice customizations that you can add.

Show battery percentage in the top panel and its related settings.
Show Battery Percentage

Disable Automatic Screen Blank

Ubuntu enables automatic screen blanking by default to save power when the system is idle. While that makes sense for many users, it may not be ideal if you frequently step away from your desk, follow long-running tasks, or keep information visible on the screen for extended periods.

Similar to the previous suggestion, go into the Power settings, but instead of General, go into "Power Saving" and uncheck the "Automatic Screen Blank" option. You can also tweak the delay time before the screen goes dark if you prefer this behavior.

✋
This is not a good idea for shared spaces like offices, cafés, or a family home with nosy people around.

Hide the Home Folder

Ubuntu places a Home folder icon on the desktop by default. While some users appreciate the quick access, others prefer a cleaner desktop with an unobstructed view of their wallpaper.

0:00
/0:09

Hide Home Folder from Desktop

If you'd rather keep the desktop free of extra icons, right-click on an empty area of the desktop and select Desktop Icons Settings. From there, disable the Show Home Folder option.

Set What Shows in the Search

When you perform a search using GNOME Search, it include more than just applications and files. Categories such as characters, emojis, settings, and other providers may also appear, which can make the results feel a bit cluttered depending on how you use your system.

Showing various search results in overview
Search Results

To customize this behavior, open Settings → Search. From here, you can disable search providers you don't use and reorder the remaining ones based on priority. For example, if you never search for emojis through GNOME Search, you can disable the Characters provider entirely.

Disable Search entries and rearrange search items
Search Settings

Install Curl and Git

Ubuntu does not come with curl or git installed by default. A bit curious, because curl is commonly used to download files, interact with web APIs, and fetch installation scripts directly from the terminal. Git, on the other hand, is the most widely used version control system and is often required when working with source code, cloning repositories, or following developer-focused guides.

You can install both packages with a single command:

sudo apt install curl git

Even if you don't need them immediately, having these tools available can save time later. Many open-source projects assume that curl and git are already installed and use them throughout their installation and setup instructions.

Learn Keyboard Shortcuts

Keyboard shortcuts are one of the easiest ways to become more productive on Ubuntu. While almost everything can be done with a mouse, knowing a handful of shortcuts can make launching applications, managing windows, and navigating the desktop significantly faster.

The good news is that GNOME makes discovering shortcuts easy. In most modern GNOME and GTK applications, pressing Ctrl + ? opens a dedicated shortcuts window that neatly organizes all available keyboard shortcuts. Spending a few minutes exploring these can reveal useful actions that might otherwise go unnoticed.

0:00
/0:18

Get Keyboard Shortcuts

If you're new to Ubuntu, it's also worth checking out dedicated lists of Ubuntu desktop shortcuts and terminal shortcuts.

Some Cool Accessibility Settings

Accessibility settings are often associated with specific needs, but several of them can be genuinely useful for everyone. Ubuntu includes a number of small quality-of-life features that can make interacting with the desktop more comfortable and efficient.

Locate the Cursor

If you work with multiple monitors or frequently have several windows open, there will eventually be a moment when the mouse pointer seems to disappear into the clutter. Instead of wasting time hunting for it, GNOME includes a built-in feature that highlights the pointer on demand.

Open Settings → Accessibility → Pointing and Clicking and enable Locate Pointer. Once enabled, pressing the left Ctrl key triggers a ripple animation around the mouse cursor, making it instantly visible on the screen.

Settings to enable location pointer in Ubuntu
Location Pointer Settings

Reduce Motion Animations

GNOME's animations generally look polished on modern hardware, but they are not essential to the desktop experience. If you prefer a more immediate feel or use older hardware, reducing animations can make the interface feel slightly more responsive.

To enable this setting, head to Settings → Accessibility → Seeing and turn on Reduced Motion. GNOME will minimize many of its transition and animation effects throughout the desktop.

Settings to enable reduced motion animation in Ubuntu
Reduced Motion Settings

Don't expect dramatic performance improvements, especially on newer systems. However, on less powerful hardware, or if you simply prefer a snappier and less animated interface, this small tweak can make the desktop feel a bit more streamlined.

Get Overamplification

Ubuntu offers an accessibility feature that can boost audio output beyond the normal limit.

To enable it, open Settings → Accessibility → Hearing and turn on Overamplification. Once enabled, the system volume can be increased above 100% when needed.

Settings to enable Overamplification
Overamplification Settings

Keep in mind that this is achieved through software amplification, so pushing the volume too high may introduce distortion or reduce audio quality. Still, it can be a useful option when dealing with particularly quiet recordings, low-volume speakers, or headphones that need a little extra boost.

Wrapping Up

One of the things I appreciate about Ubuntu is that it works well with its default settings while still offering plenty of ways to tailor the experience. You don't need to apply every tweak mentioned here. Pick the ones that match your workflow and ignore the rest.

If you're new to Ubuntu, start with the essentials and explore gradually. Over time, you'll discover which settings, extensions, and tools genuinely improve your day-to-day experience, helping you build a desktop that feels truly your own.

Canonical dev mocks up an Ubuntu launcher that uses AI

23 October 2026 at 04:05

What would deeper AI integration on the Ubuntu desktop look like? Well, you don’t need to think too hard to find out. A Canonical engineer has published a prototype launcher that simulates how on-device AI could be used to enhance and aid users of the Ubuntu desktop. But the warty-prototype snap by Didier Roche-Tolomelli (aka didrocks) is not a real launcher. It’s a semi-interactive, automated mockup. It simulates things a user could do, and that includes interacting with a (theoretical) on-device AI model to complete tasks. The Snap Store listing refers to it as a ‘design-discussion prototype of the next Ubuntu […]

You're reading Canonical dev mocks up an Ubuntu launcher that uses AI, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

💾

Canonical dev mocks up an Ubuntu launcher that uses AI

23 October 2026 at 04:05

What would deeper AI integration on the Ubuntu desktop look like? Well, you don’t need to think too hard to find out. A Canonical engineer has published a prototype launcher that simulates how on-device AI could be used to enhance and aid users of the Ubuntu desktop. But the warty-prototype snap by Didier Roche-Tolomelli (aka didrocks) is not a real launcher. It’s a semi-interactive, automated mockup. It simulates things a user could do, and that includes interacting with a (theoretical) on-device AI model to complete tasks. The Snap Store listing refers to it as a ‘design-discussion prototype of the next Ubuntu […]

You're reading Canonical dev mocks up an Ubuntu launcher that uses AI, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

💾

What’s new in the Ubuntu 26.10 flavours?

16 October 2026 at 17:07

Official Ubuntu flavour logos in a circle around the Ubuntu logo.Alongside the main edition, Ubuntu 26.10 brought new releases of community flavours, including Kubuntu, Xubuntu and a welcome return of Ubuntu MATE. All of Ubuntu’s official flavours share the same foundations as the main release, with the Linux 7.3 kernel, Mesa 26.2 graphics drivers, updated tooling and support for installing snap packages from the Snap Store. Read on for an overview of the key changes in some of the most popular Ubuntu flavours, and downloads links to grab an ISO if you feel like sampling one them first-hand. Ubuntu 26.10 Flavour Recap Xubuntu 26.10 Xubuntu 26.10 ships with Xfce 4.20, […]

You're reading What’s new in the Ubuntu 26.10 flavours?, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

What’s new in the Ubuntu 26.10 flavours?

16 October 2026 at 17:07

Official Ubuntu flavour logos in a circle around the Ubuntu logo.Alongside the main edition, Ubuntu 26.10 brought new releases of community flavours, including Kubuntu, Xubuntu and a welcome return of Ubuntu MATE. All of Ubuntu’s official flavours share the same foundations as the main release, with the Linux 7.3 kernel, Mesa 26.2 graphics drivers, updated tooling and support for installing snap packages from the Snap Store. Read on for an overview of the key changes in some of the most popular Ubuntu flavours, and downloads links to grab an ISO if you feel like sampling one them first-hand. Ubuntu 26.10 Flavour Recap Xubuntu 26.10 Xubuntu 26.10 ships with Xfce 4.20, […]

You're reading What’s new in the Ubuntu 26.10 flavours?, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

Ubuntu websites offline due to ‘sustained’ DDoS attack [Resolved]

8 October 2026 at 16:08

Ubuntu desktop being watched by malicious eyesCanonical reports a 'sustained distributed denial of service attack' on its websites, leading to outages. It says its teams are working to get them back online.

You're reading Ubuntu websites offline due to ‘sustained’ DDoS attack [Resolved], a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

Ubuntu websites offline due to ‘sustained’ DDoS attack [Resolved]

8 October 2026 at 16:08

Ubuntu desktop being watched by malicious eyesCanonical reports a 'sustained distributed denial of service attack' on its websites, leading to outages. It says its teams are working to get them back online.

You're reading Ubuntu websites offline due to ‘sustained’ DDoS attack [Resolved], a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

Ubuntu wiki gets its first overhaul in 16 years

22 September 2026 at 18:08

Ubuntu wiki old design and new designAn all-new Ubuntu Wiki has gone live, giving the information hub its first substantive overhaul since 2010. The updated wiki now runs on MediaWiki, which adds a slate of modern backend and frontend features readers and editors alike will appreciate, e.g., search auto-suggest, mobile-friendly adaptations, light/dark mode, a WYSIWYG editor and more. Security was also a motivation, since the sites – there were actually two wikis – ran on an old stack tied Python 2, leaving it exposed to vulnerabilities. Ubuntu’s new wiki will serve a different role to the old one. In years past, the Ubuntu Wiki was used to […]

You're reading Ubuntu wiki gets its first overhaul in 16 years, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

Ubuntu wiki gets its first overhaul in 16 years

22 September 2026 at 18:08

Ubuntu wiki old design and new designAn all-new Ubuntu Wiki has gone live, giving the information hub its first substantive overhaul since 2010. The updated wiki now runs on MediaWiki, which adds a slate of modern backend and frontend features readers and editors alike will appreciate, e.g., search auto-suggest, mobile-friendly adaptations, light/dark mode, a WYSIWYG editor and more. Security was also a motivation, since the sites – there were actually two wikis – ran on an old stack tied Python 2, leaving it exposed to vulnerabilities. Ubuntu’s new wiki will serve a different role to the old one. In years past, the Ubuntu Wiki was used to […]

You're reading Ubuntu wiki gets its first overhaul in 16 years, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.

Ubuntu 26.10 "Stonking Stingray": All the New Features So Far

25 July 2026 at 07:22
a stingray fish illustration is shown on the top, with ubuntu 26.10 new features written below

Every two years, Canonical puts out a Long Term Support release that gets five years of security updates, which can be stretched further with Ubuntu Pro. In between those LTS releases, Canonical ships an interim version every six months, and each one is supported for nine months.

Those releases don't carry the same importance as an LTS, but that's the point. They give Canonical room to test newer kernels, toolchains, and design changes with a smaller user base before those changes get baked into the next LTS.

The next one, Ubuntu 26.10, carries the codename "Stonking Stingray", continuing the tradition of ordered alphabetical codenames after Resolute Raccoon (26.04).

Stonking is British slang for something impressively big or excellent, and a stingray is the flat-bodied, boneless fish that spends most of its time half-buried in sand near the seafloor (which is quite understandable seeing the state of this world).

If things go as planned, it will land on October 15, 2026, with a short support window that will close in July 2027.

⏱️ Ubuntu 26.10 Release Schedule

fastfetch output of a development build of ubuntu 26.10 shown inside a terminal window

Below is the release schedule as laid out by Canonical; do keep in mind that some of these dates might change if there are any regressions or other developmental hurdles.

Milestone Date
Ubuntu Testing Week (optional) July 2, 2026
Feature Freeze August 20, 2026
Ubuntu Testing Week (optional) August 27, 2026
Beta Release September 24, 2026
Kernel Freeze October 1, 2026
Release Candidate October 8, 2026
Final Release October 15, 2026

Know that this is kind of a live blog where we will be adding new changes and handling any anticipated features as they appear. So, yeah, let's see what's coming with Ubuntu 26.10. 👇

Something for New Installations

The typical installation and onboarding experience of Ubuntu.

Canonical is redesigning how Ubuntu gets installed, with a sharper focus on cutting down the complexity around partitioning and storage configuration. The new design is set to lean on safe defaults, guided workflows, and will be hiding advanced options behind a button (presumably) instead of throwing everything at you at once.

Alongside the installer, a new onboarding flow is in the works too. Instead of asking you to make every decision during setup, Ubuntu will move personalization and configuration into a dedicated first-boot experience after the system is already up and running.

Organizations deploying Ubuntu at scale will still be able to automate and configure these onboarding steps, just like they can with the current installer (pictured above).

Worth noting that both of these are explicitly aimed at Ubuntu 28.04 LTS. The design work is happening during the 26.10 cycle, but don't expect the finished experience to show up fully baked in this release.

Linux Kernel 7.x

a terminal window showing outputs for various uname commands on an ubuntu 26.10 development build

The Snapshot 2 build of Ubuntu 26.10 that I tested came with Linux kernel 7.0.0-14, but treat that as a temporary implementation rather than a final answer. Canonical changed its kernel selection policy back in 2024, opting to ship whatever upstream kernel version is the latest available at release freeze, even if it's still in Release Candidate status.

That policy got extended further in 2025 to also track interim kernel versions during the development cycle itself through monthly snapshots, for better test coverage along the way.

That means the kernel version could easily shift between now and October. We have already covered what Linux kernel 7.0 itself brought to the table, so if you want the full rundown, that's a good place to start.

A Major D-Bus Change

Ubuntu is finally swapping out dbus-daemon, the default D-Bus implementation it's used since its very first release back in 2004, in favor of dbus-broker.

If you didn't know, D-Bus is the messaging system your desktop relies on constantly, letting apps, background services, and the system itself pass messages back and forth. Anything from plugging in a USB drive to updating a notification badge runs through it.

Dbus-daemon has held up fine as the reference implementation for over two decades, but it has limits. Under heavy load, messages can vanish unexpectedly, and it queries message targets sequentially instead of all at once, which adds up to latency as the bus gets busier.

Dbus-broker addresses both by design, built around an asynchronous, event-driven architecture from the ground up, and it's already the default on several other distros.

GNOME 51

an early build of gnome 51 is showcased here on a development build of ubuntu 26.10 where the settings app and file manager are open

Ubuntu 26.10 is shipping with GNOME 51, the upcoming stable release from the GNOME project that's scheduled to be out sometime in mid-September. We start with the Shell changes first, which has picked up many fixes that you will actually notice during daily use.

Screenshot selections now stretch cleanly to monitor edges instead of stopping short, the power-off dialog properly shows its "Install Updates" checkbox again, and the overview search box stops resetting its loading spinner every time you type a character.

It also swaps in custom sound effects instead of pulling from the system sound theme, saves and restores your monitor brightness across sessions, and only lights up the audio input icon in the top bar while your mic is actually recording.

The rest of the desktop environment picks up smaller but still visible changes.

The Settings app drops the "Windowing System" (Wayland ftw, I guess?) field from the About page and condenses system details into a single page. Similarly, Software now warns you before installing an app that's already reached end-of-life, and Calendar got its internals rebuilt around GListModel for better performance and has picked up support for opening Teams meeting links directly.

Mutter, GNOME's window manager, is dropping support for legacy NVIDIA drivers.

AI is Coming

If you remember, Canonical shared their plans to handle AI on Ubuntu back in April, when Jon Seager split things into two approaches. Implicit AI improves things you already use without you noticing, and explicit AI is the kind you'd actually summon on purpose.

The short version of it all was that everything would be local-first and built around open-weight models rather than forcing a cloud subscription onto users.

One of the earliest features under this new initiative is Myna, a local speech-to-text tool built around a simple push-to-talk flow. Hold a hotkey, speak, and the transcribed text lands wherever your cursor was sitting.

Recognition happens entirely on your machine through a sandboxed component called the Canonical Inference Snap, with different model sizes to match whatever hardware you're running.

Ubuntu Certified Check

If you ever wondered whether your device was officially supported by Ubuntu, then you will like this one. The Settings menu is getting a simple way to check whether your machine is Ubuntu Certified.

Once live, it will show up inside the About page, where it will pull a certification status for your exact hardware model, checked against Canonical's own database.

Results range from fully certified to certified for a different Ubuntu version, close to a certified model, not certified, or unable to check.

Package-Agnostic Approach

the app center app on ubuntu 26.10 handling deb file installation

The App Center is getting rebuilt to handle apps consistently no matter which packaging format they come in, with unified search, ratings, categories, and metadata.

Earlier, when Canonical rebuilt Ubuntu's software center into App Center for 23.10, it launched without the ability to install local DEB files at all. Double-clicking one either threw an error or left you staring at a spinner that never resolved.

That got fixed with an update to Ubuntu 24.04's App Center months later.

Continued Rustification

Canonical is putting more weight behind memory-safe Rust rewrites, recently becoming a Gold Sponsor of the Trifecta Tech Foundation with a €40,000 yearly contribution.

Ubuntu's already swapped coreutils, findutils, diffutils, and sudo for their Rust equivalents, with sudo-rs becoming the default in 25.10. Ntpd-rs is next in line, a Rust rewrite of the tools Ubuntu uses to keep system clocks synced.

The Trifecta funding is going toward catching ntpd-rs up to chrony on features like multi-threaded NTP servers and GPSd support, alongside AppArmor and seccomp hardening.

Although ntpd-rs is arriving in the testing archives for 26.10, it becoming the default is planned for next year, when Ubuntu 27.04 is introduced.

Miscellaneous Additions

And here are a bunch of smaller but important changes that deserve your attention now that you have scrolled so far. ☠️

  • Continued push toward WCAG 2.2 AA accessibility compliance.
  • New wallpapers, chosen through the usual community wallpaper contest, though Canonical hasn't announced it yet.
  • The full desktop experience for RISC-V, targeting RVA23-compliant hardware.
  • Better driver management controls, with clearer metadata and maturity indicators for available drivers.
  • Microsoft password and MFA authentication support through authd, with approval requests routed through Microsoft Authenticator.
  • An experimental amd64v3 (x86-64-v3) package archive for testing performance gains on newer Intel and AMD CPUs.
  • A proposed change to strip signed GRUB builds down to bare essentials for Secure Boot, dropping support for filesystems like Btrfs and ZFS in the process.

📥 Download Ubuntu 26.10

While the stable ISOs for this interim Ubuntu release are a few months out, you can take the snapshots for test runs on a virtual machine or a spare machine.

We don't recommend installing such images on computers that are used daily or on production-sensitive deployments because these contain components that might break at any time.

Ubuntu on MacBook Pro - Magic Mouse / TrackPad Settings

If you’ve ever installed Ubuntu or another Linux distro on your MacBook, MacBook Pro, or iMac, you’ve probably run into one persistent frustration: the Apple Magic Mouse and Trackpad just don’t behave like they do when running macOS, but normal ‘Windows” mice work fine.

After pairing via Bluetooth, you might notice that the right-click (secondary click) doesn’t work, the left-click only registers on the far edge, and scrolling or gestures are unreliable at best, if not have a complete mind of their own!

For devices that feel magical on macOS, they can seem downright clunky on Linux. But don’t worry there s a clean, open source solution that fixes everything, its called ‘Magic Mouse HID driver for Linux’ by Ricardo Rodrigues. This lightweight driver re-enables full Apple-style functionality for both the Magic Mouse and the Magic Trackpad under Ubuntu all in under ten minutes.

The Problem: Apple Magic Mouse on Ubuntu

When you connect your Magic Mouse or Trackpad to Ubuntu, it’s recognized as a generic HID (Human Interface Device). The Linux kernel includes a basic driver (hid_magicmouse), but it lacks the full Apple-specific support you’re used to, as you’ll know from using a Windows mouse with macOS there is something different about these magic mice and that’s why they don’t work like they should. It’s frustrating because the Magic Mouse hardware itself is excellent it just needs the right software layer.

Typical issues include:

  • Right-click not working (or only works occasionally)

  • Left-click zones inconsistent, requiring firm presses on the far left side

  • No smooth scrolling or gestures

  • Battery percentage not reported correctly

  • Overall lag or stutter when using Bluetooth

The Solution: magicmouse-hid Driver

That’s where the Linux-Magic-Trackpad-2-Driver project comes in. Developer Ricardo E. P. Rodrigues created a modern replacement for the kernel’s built-in driver. His project, hosted on GitHub as Linux-Magic-Trackpad-2-Driver, adds proper gesture handling, right-click recognition, and full multitouch support for:

  • Apple Magic Mouse (1st & 2nd Gen)

  • Apple Magic Trackpad (1st & 2nd Gen)

The driver is distributed as a DKMS module (Dynamic Kernel Module Support), which means it automatically rebuilds itself whenever Ubuntu updates your kernel no need to reinstall it every time you upgrade.

How to Install the Magic Mouse / Trackpad Driver on Ubuntu

The process is simple and safe. It doesn’t modify your kernel permanently and can be uninstalled easily.

Step-by-Step Guide

Open your terminal and run the following commands one by one:

# 1. Install DKMS and Git
sudo apt install dkms git -y

# 2. Clone the repository
git clone https://github.com/RicardoEPRodrigues/Linux-Magic-Trackpad-2-Driver.git

# 3. Move into the folder
cd Linux-Magic-Trackpad-2-Driver

# 4. Make the installer executable
chmod u+x install.sh

# 5. Install the driver
sudo ./install.sh

When the installer completes, reboot your machine or reload the module manually:

sudo modprobe hid_magicmouse

What Gets Fixed

Feature Before After Installing Driver
Right-Click Broken or inconsistent Works perfectly
Left-Click Only far left edge Works across full surface
Scrolling Jerky, slow Smooth, natural
Gestures Limited or none Supported (depending on model)
Battery Not shown Reported accurately in system settings

How to Uninstall

If you ever want to remove the driver, it’s easy:

cd Linux-Magic-Trackpad-2-Driver
./uninstall.sh

When I first paired my Apple Magic Mouse with Ubuntu on a MacBook Pro, it was nearly unusable. Right-click didn’t work, scrolling was jerky, and simple navigation felt broken.

After discovering Ricardo Rodrigues’s magicmouse-hid driver, the difference was night and day. It’s one of those small tweaks that completely changes your Linux experience on Apple hardware, we’re slowly getting to the point everything just works the way it should. (Shame the graphics card couldn’t hey!!), We’re also getting updates and security patches running modern Linux which includes a modern browser too.

If you’re running Ubuntu (or any Linux distro) on a Mac, this is an essential setup step. With just a few terminal commands, your Magic Mouse and Trackpad regain their “magic.”

Make sure you read the full page https://github.com/RicardoEPRodrigues/magicmouse-hid?tab=readme-ov-file which includes bug fixes for bluetooth issues or your mouse not reconnecting after a reboot.

Bringing Back the macOS Cursor “Shake to Find” on Ubuntu. Meet Wiggle & Jiggle

As part of my never-ending mission to give my Ubuntu-powered MacBook Pro just a little more of that macOS polish without losing the Linux soul underneath I recently realised I was missing something very small but very useful: the “shake to find the cursor” feature.

If you’ve used macOS for any amount of time, you know the one. Lose your cursor across multiple screens? Give the mouse or trackpad a quick wiggle and the pointer grows dramatically, making it unmissable.

It turns out… I use that gesture a lot. And after moving my MacBook Pro fully onto Ubuntu (complete with one or two external monitors), I kept instinctively shaking the cursor only for nothing to happen. Not very Apple Geek friendly.

But good news: Linux has caught up.

Two GNOME extensions now bring the macOS cursor-jiggle behaviour straight to Ubuntu:

  • Jiggle → For older Ubuntu releases

  • Wiggle → For Ubuntu 24.04 LTS and newer

And honestly? They work brilliantly.

Why This Matters (Especially on Multi-Monitor Setups)

  1. Lose your cursor on a dual-monitor desk setup?

  2. Big hi-res display?

  3. Dark wallpapers or themes?

It happens a lot more than you think.

On macOS, shaking the cursor to enlarge it is second nature you barely think about it. Using Ubuntu daily made me realise how ingrained that small UX delight had become. Re-adding it makes Ubuntu feel instantly more fluid and familiar on Mac hardware.

Wiggle vs Jiggle, Which One Do You Need?

Wiggle

For Ubuntu 24.04 LTS / GNOME 45+
👉 https://extensions.gnome.org/extension/6784/wiggle/

This is the modern, smooth, actively-supported version. It simply magnifies the cursor when you shake it just like macOS.

Jiggle

For Ubuntu 20.04 / 22.04 LTS on older GNOME versions
Offers several effects (cursor scaling, spotlight, even fireworks). Fun, but not as clean.

Installing Wiggle (Ubuntu 24.04 LTS)

Before you install any GNOME extension through the browser, you need the connector package:

sudo apt install chrome-gnome-shell

Then:

  1. Open the extension page here:
    Wiggle → https://extensions.gnome.org/extension/6784/wiggle/

  2. Switch the toggle to ON

  3. Approve the installation

  4. Open Extensions (or GNOME Tweaks) to enable/configure it

Now give your trackpad or mouse a shake… and enjoy that familiar macOS moment.


This tiny tweak genuinely improves daily workflow especially when your MacBook running Ubuntu is hooked up to multiple external displays. It’s one of those micro-interactions you didn’t realise you’d miss until it’s gone.

If you’re aiming to blend the best bits of macOS with the power and flexibility of Linux (like I do here on The Apple Geek), Wiggle is an absolute must-install.

Preview Files on Linux

Preview Files Instantly on Linux with GNOME Sushi

If you’ve ever wished macOS-style Quick Look worked on Linux, there’s a neat little tool called GNOME Sushi that makes it possible. It’s fast, simple, and integrates seamlessly with the GNOME desktop.

What It Does

GNOME Sushi lets you preview files without opening them. Highlight a file in Files (Nautilus) and press Space just like Quick Look on a Mac. Images, PDFs, videos, and even text files pop up instantly in a floating window. No extra clicks, no heavy apps just speed.

Installing GNOME Sushi

Installation is ridiculously easy. Open a terminal and type:

sudo apt install gnome-sushi

It’ll pull in the package and all the dependencies. Once installed, just highlight a file in Nautilus and press Space. Boom preview mode activated.

Why It’s Handy

  • Fast previews: No waiting for apps to load.

  • Supports many file types: From PDFs and images to videos and plain text.

  • Lightweight: Doesn’t hog resources like full applications.

Extra Tips

One thing I love about GNOME Sushi is how it handles video and image files. Hover over a video, hit Space, and you get a mini player without opening VLC or any other media app. Images zoom smoothly, and PDFs scroll instantly perfect for when you’re skimming through documents.

It’s also a real workflow booster. Need to check ten files quickly? Highlight, Space, glance, close, repeat. That’s it. No bouncing between apps, no accidental edits just pure preview bliss. For anyone switching from macOS or just wanting more efficiency on Linux, GNOME Sushi is one of those small tweaks that makes daily file management feel a little more magical.

Learn More

You can check out the source code or contribute to the project on GNOME’s official GitLab repository here: https://gitlab.gnome.org/GNOME/sushi.

Ubuntu on MacBook: Making Linux Feel Like macOS

If you’ve ever tried running Ubuntu on a MacBook, you’ll know the keyboard just feels… wrong. Command keys don’t do what you expect, Option keys aren’t Alt, and all those macOS shortcuts you love are suddenly broken. Add in the trackpad quirks and F-key frustrations, and you quickly realize Linux doesn’t magically turn your MacBook into a perfect clone of macOS at least, not out of the box.

But here’s the good news: with a few small tweaks, you can have all the macOS behaviors you expect, while keeping the full power and customizability of Ubuntu. This post is your ultimate guide.

Keyboard: Command, Option, Control Fixed

By default, Ubuntu treats the MacBook keyboard like any other PC. That means:

  • ⌘ (Command) acts as Super (used for GNOME shortcuts, but not Ctrl-like shortcuts)
  • ⌥ (Option) acts as Alt, which is okay
  • Ctrl stays where it is, but your muscle memory wants Command

We fix this with GNOME Tweaks or a simple command-line setup.

Step 1: Install GNOME Tweaks

sudo apt install gnome-tweaks

Open Tweaks, go to Keyboard & Mouse → Additional Layout Options.

  • Swap Ctrl and Win: Makes ⌘ behave like Ctrl
  • Alt/Win swap (optional): Makes ⌥ behave as Alt

Step 2: Apply via CLI (Wayland-safe)

gsettings set org.gnome.desktop.input-sources xkb-options "['ctrl:swap_lwin_lctl','altwin:swap_lalt_lwin']"

Check with:

gsettings get org.gnome.desktop.input-sources xkb-options

Step 3: Make ⌘+Space Spotlight-style

gsettings set org.gnome.settings-daemon.plugins.media-keys search "['space']"

Press ⌘+Space instant search.

Step 4: Optional: ⌘ alone → Activities Overview

gsettings set org.gnome.mutter overlay-key 'Super_L'

Now pressing Command alone opens Activities, just like pressing Mission Control on macOS.

Trackpad Tweaks

MacBook trackpads are amazing hardware, but Linux doesn’t always get it right out of the box. Here’s how to fix it:

  1. Natural Scrolling: Settings → Mouse & Touchpad → Enable Natural Scrolling
  2. Tap-to-Click: Settings → Mouse & Touchpad → Tap to click
  3. Gestures (optional): Install touchegg for multi-finger gestures:
    sudo apt install touchegg
    touchegg &
    
    Map three-finger swipe to workspace switch, pinch to zoom, etc.

F-Key and System Controls

MacBook function keys control brightness, volume, and media. Out of the box, Linux may require fn to trigger them.

  • Brightness keys: Usually just work; if not, install brightnessctl
    sudo apt install brightnessctl
    
  • Volume keys: Check GNOME Settings → Keyboard Shortcuts → Sound
  • Media keys: Install playerctl for multimedia key mapping

System Polish

Want your Ubuntu to look like macOS too? A few aesthetic tweaks:

  • Fonts: San Francisco / SF Mono (Mac-like fonts)
  • Apple’s San Francisco font isn’t bundled with Linux, but you can get it from Apple’s official developer site:

  1. Go to Apple Developer Fonts and log in with your Apple ID.
  2. Download SF Pro or SF Mono.
  3. Extract the .zip file.
  4. Copy the .otf files to your local fonts directory:
    mkdir -p ~/.local/share/fonts/SF-Pro
    cp ~/Downloads/SF-Pro/*.otf ~/.local/share/fonts/SF-Pro/
    
  5. Refresh the font cache:
    fc-cache -f -v
    
  6. Select San Francisco (SF Pro) or SF Mono in GNOME Tweaks, Terminal, or apps.

SF Mono is perfect for terminals GNOME Terminal → Preferences → Profile → Text → Custom Font → SF Mono.

  • Window Buttons: GNOME Tweaks → Themes → Adjust buttons to left
  • Dock: Use Dash to Dock or Dash to Panel for a macOS-style dock
  • Backgrounds: Match macOS default wallpaper for familiarity
  • One-Line Setup Script

    #!/bin/bash
    # MacBook keyboard remap for Ubuntu
    gsettings set org.gnome.desktop.input-sources xkb-options "['ctrl:swap_lwin_lctl','altwin:swap_lalt_lwin']"
    gsettings set org.gnome.settings-daemon.plugins.media-keys search "['space']"
    gsettings set org.gnome.mutter overlay-key 'Super_L'
    echo "MacBook keyboard remap applied!"
    

    Save as macbook-ubuntu-tweaks.sh, make executable:

    chmod +x macbook-ubuntu-tweaks.sh
    ./macbook-ubuntu-tweaks.sh
    
    Run it once remaps persist across reboots.

    Wrapping Up

    With these tweaks, Ubuntu feels so much more like macOS on your MacBook. Shortcuts behave as expected, trackpad gestures are natural, F-keys work without fighting, and the system even looks familiar.

    It’s a blend of the power and flexibility of Linux with the polish and muscle memory of macOS. For anyone using a MacBook as their main Linux machine, these tweaks are essential and the best part? They’re fully reversible if you want to experiment.

    MacBook Pro: External Display on Ubuntu Without the dGPU

    Reviving the 2011 MacBook Pro: External Display on Ubuntu Without the dGPU

    If you’ve read my previous post on repairing the 2011 MacBook Pro GPU failure, you’ll know the story all too well the infamous AMD Radeon dGPU failure that left thousands of otherwise perfect machines effectively useless.

    I’d already disabled the faulty AMD GPU at the firmware level and forced Ubuntu to use the integrated Intel HD 3000 graphics. That works brilliantly for most things until you need an external monitor.

    The mini DisplayPort on these models is wired only to the discrete GPU, which means once the AMD chip is disabled, the port goes dead. No amount of software trickery will bring it back to life the connection simply doesn’t exist anymore.

    But that’s not the end of the road. Thanks to a simple USB DisplayLink adapter and a bit of Linux know-how, we can get full dual-monitor functionality again no soldering, no GPU reflowing, and no magic smoke.

    The Problem

    • MacBook Pro model: 2011 15-inch (MacBookPro8,2)

    • Issue: Discrete AMD GPU failure

    • Workaround: Disable AMD GPU, use Intel graphics only

    • Result: No working mini DisplayPort

    For years, that meant living with just the internal display. But when I installed Ubuntu 24.04 LTS, I discovered a new path forward DisplayLink.

    The Solution: DisplayLink USB Graphics

    DisplayLink adapters work by compressing the display output over USB and decoding it on the adapter’s built-in chip, then sending it to your monitor via HDMI, DVI, or DisplayPort.

    I used the StarTech USB32HDPRO, though almost any DisplayLink-based USB 3.0 adapter should work just as well.

    What makes DisplayLink perfect for this situation is that it doesn’t depend on the GPU hardware routes inside the MacBook. It just needs a USB port and those are still alive and well.

    Installing the DisplayLink Driver on Ubuntu 24.04

    Plugging in the adapter won’t immediately do anything. You’ll need to install the official DisplayLink Linux driver.

    Step 1Download the Driver

    Go to DisplayLink’s official driver page and grab the latest .zip package for Ubuntu.

    Extract it, then in your terminal run:

    cd ~/Downloads/DisplayLink* sudo ./displaylink-installer.sh install 

    When it finishes, reboot your MacBook:

    sudo reboot 

    Step 2 Plug In the Adapter

    After rebooting, plug your DisplayLink adapter into a USB 3.0 port and connect your external display.

    If everything’s gone well, your external monitor should come to life but it’ll probably mirror your internal screen by default. Let’s fix that.

    Step 3 Automatically Extend the Display

    To make Ubuntu automatically detect and extend your DisplayLink screen every time it’s plugged in (or when you log in), we can use a small shell script.

    Create a new file:

    sudo nano /usr/local/bin/displaylink-autosetup.sh 

    Paste this inside:

    #!/bin/bash # displaylink-autosetup.sh — Automatically extend desktop when DisplayLink screen is detected sleep 8 # Wait a few seconds for the DisplayLink driver to load MAIN_DISPLAY=$(xrandr --query | grep " connected" | grep -v "HDMI-" | awk '{ print $1 }' | head -n 1) DL_DISPLAY=$(xrandr --query | grep " connected" | grep "HDMI-" | awk '{ print $1 }' | head -n 1) if [ -n "$DL_DISPLAY" ] && [ -n "$MAIN_DISPLAY" ]; then xrandr --output "$DL_DISPLAY" --auto --right-of "$MAIN_DISPLAY" echo "DisplayLink screen ($DL_DISPLAY) extended to the right of $MAIN_DISPLAY" else echo "No DisplayLink display detected or main display missing." fi 

    Save and exit (Ctrl + O, Enter, Ctrl + X), then make it executable:

    sudo chmod +x /usr/local/bin/displaylink-autosetup.sh 

    Step 4 Run It Automatically on Startup

    Ubuntu’s “Startup Applications” tool can handle this easily.

    If it’s not already installed:

    sudo apt install gnome-startup-applications 

    Then launch it:

    gnome-session-properties 

    Click Add →
    Name: DisplayLink Auto Setup
    Command: /usr/local/bin/displaylink-autosetup.sh
    Comment: Automatically extend DisplayLink screen

    Step 5 Run It After Sleep/Wake (Optional)

    If you often close your lid or suspend the MacBook, add this small script so it re-applies after waking:

    sudo nano /lib/systemd/system-sleep/displaylink-resume.sh 

    Paste this in:

    #!/bin/bash case $1 in post) export DISPLAY=:0 export XAUTHORITY=/home/$USER/.Xauthority /usr/local/bin/displaylink-autosetup.sh ;; esac 

    Then:

    sudo chmod +x /lib/systemd/system-sleep/displaylink-resume.sh 

    Now whenever your MacBook wakes up, it’ll re-detect the DisplayLink monitor and extend it automatically.

    The Result

    After this setup:

    • Ubuntu boots using the Intel integrated GPU only

    • The DisplayLink adapter provides a second monitor via USB

    • The display layout automatically restores at login or wake

    • No reliance on the failed AMD dGPU

    Performance is perfectly usable for web, office work, and even lightweight development. You won’t be gaming or editing 4K video on it but for daily use, it’s an elegant fix that keeps these old machines alive and productive.

    Final Thoughts

    This 2011 MacBook Pro might have been written off years ago by Apple, but with Ubuntu and a little Linux ingenuity, it’s still a fully functional laptop in 2025 complete with dual monitors.

    In true Apple Geek fashion, this is about more than saving an old Mac it’s about understanding and adapting the hardware to keep it useful long after the official support has ended.

    If you’re following this series, next time I’ll show how to fine-tune power management and cooling on these Intel-only 2011 models to make them run cooler and quieter under Linux.

    ❌
    ❌